Gefen EXT-HD-SL-444 User Manual page 77

Advanced Operation
Commands
#reboot
The #reboot command reboots the matrix. Executing this command is the equivalent
of disconnecting and reconnecting the AC power cord, on the back of the matrix.
The matrix must be rebooted after changing any of the IP settings.
Syntax
#reboot
Parameters
None
Example
#reboot
DEVICE HAS BEEN REBOOTED
IP: 192.168.5.155
Netmask: 255.255.255.0
Gateway: 192.168.5.254
Ethernet Cable Plug in!!
page | 67