Main ► I/O Status - Gefen EXT-HD-SL-444 User Manual

Advanced Operation
Web Interface
Main ► I/O Status
Name
Displays the name of the output. The name of the output can be changed using
the #set_output_name command or through the I/O Setup ► I/O Names page
of the Web interface.
RSENSE
Displays the current Rsense state.
Mask
Displays the masking state of each output.
HPD
Displays the Hot-Plug Detect (HPD) state of each output.
HDCP
Indicates if HDCP-detection is enabled or disabled on each output.
page | 114