Advanced Operation
#set_http_port
The #set_http_port command specifies the Web server listening port. The matrix
must be rebooted after executing this command. The default port setting is 80. Use the
#show_http_port
command to display the current HTTP listening port.
Syntax
#set_http_port param1
Parameters
param1
Example
#set_http_port 82
HTTP PORT 82 IS SET
#set_hue
The #set_hue command sets the hue for all outputs.
Syntax
#set_hue param1
Parameters
param1
Example
#set_hue 30
OUT A SET TO HUE VALUE : 30
Port
Value
page | 75
Commands
[1 ... 1024]
[0 ... 100]