Gefen EXT-HD-SL-444 User Manual page 86

Advanced Operation
#set_input_name
The #set_input_name command assigns a name to the specified input on the matrix.
Syntax
#set_input_name param1 param2
Parameters
param1
param2
Example
#set_input_name 3 Blu-ray
INPUT3 NAME IS ASSIGNED TO Blu-ray
#set_ipadd
The #set_ipadd command sets the IP address of the matrix. The IP address must
be entered using dot-decimal notation. The matrix must be rebooted after executing
this command. The default IP address is 192.168.1.72. Use the
command to display the current IP address of the matrix.
Syntax
#set_ipadd param1
Parameters
param1
Example
#set_ipadd 192.168.1.190
IP ADDRESS : 192.168.1.190
Input
Name
IP address
page | 76
Commands
[1 ... 4]
#show_ipconfig