Saving Routing Presets - Gefen EXT-HD-SL-444 User Manual

Operating the 4x4 Seamless Matrix for HDMI
The 4x4 Seamless Matrix for HDMI allows routing states to be saved to any of 10 preset
memory locations. Presets are retained in memory even if the matrix is powered OFF.
NOTE: Routing presets cannot be saved using the IR remote
control unit.
1. Create the desired routing state.
In the example, above, we have masked Output 1, and set Input 2 to Output 2, Input
3 to Output 3, and so on. Note that when saving a routing state, any outputs that are
masked are also saved to memory.
2. Let's save this configuration to Preset 1. Press and hold button 1 on the Routing
Presets section, on the front panel.
3. After a few seconds, button 1 will turn on and remain illuminated, indicating that the
current routing configuration has been saved.

Saving Routing Presets

Press and hold button 1
Preset is saved
page | 18
Routing Basics