Gefen EXT-HD-SL-444 User Manual page 112

Advanced Operation
Commands
#show_ver_data
The #show_ver_data command displays the current software and hardware version.
Syntax
#show_ver_data
Parameters
None
Example
#show_ver_data
VERSION : SW[V2.11] / HW[V2.1]
#unmask
The #unmask command unmasks the specified output(s). Use the #mask command to
mask the specified output(s). If param1 = 0, then all outputs are unmasked.
Syntax
#unmask param1
Parameters
param1 Output [0 ... 4]
Example
#unmask 2
OUTPUT 2 IS UNMASKED
page | 102