I/O Setup ► Hpd Control - Gefen EXT-HD-SL-444 User Manual

Advanced Operation
Web Interface
I/O Setup ► HPD Control
Input #
The number of the input.
Name
The name of the input. The name of each input can be changed using the
#set_input_name command or through the I/O Setup ► I/O Names page of
the Web interface.
Pulse
Click the Pulse button to cycle the HPD line on the desired input. This is the
equivalent of physically disconnecting and reconnecting the HDMI cable between
the source device and the matrix.
page | 119