Introduction; Standby Mode; Turning On The 4X4 Seamless Matrix For Hdmi - Gefen EXT-HD-SL-444 User Manual

Operating the 4x4 Seamless Matrix for HDMI

Introduction

The LED next to the Power button, on the front panel, indicates the power state of the
4x4 Seamless Matrix for HDMI. In standby mode, power is being supplied to the 4x4
Seamless Matrix for HDMI but the unit is not turned on. This LED will be red and remain
illuminated as long as the unit is in standby mode. If this LED does not illuminate, check
the connection between the power receptacle on the 4x4 Seamless Matrix for HDMI and
the AC outlet.

Turning on the 4x4 Seamless Matrix for HDMI

Press the Power button to power-on the matrix. The Power button will turn blue and
remain illuminated as long as the matrix is powered-on. To power-off the 4x4 Seamless
Matrix for HDMI and return to standby mode, press the Power button again.

Standby Mode

Red LED indicates that
matrix is in standby mode
LED indicator turns off
Power button
is illuminated
page | 12