Advanced Operation
Name (Outputs)
The name of the output. The name of the output can also be changed using the
#set_output_name
the Web interface.
Output (Outputs)
Check to select the desired output for routing.
Input # (Inputs)
Click the radio button next to the desired input to be routed.
Name (Inputs)
The name of the input. This name can be changed using the
#set_input_name
the Web interface.
Output (Status)
The outputs that are available for
routing.
Select All Outputs
Place a check mark in this box to select all outputs.
Route
Click the Route button to route the selected input to the select output(s).
Legend
Provides color-coded information on the status of each input and output.
command or through the
command or through the
page | 111
I/O Setup ► I/O Names
I/O Setup ► I/O Names
Input # (Status)
The input that is currently routed to
the output.
Web Interface
page of
page of