Gefen EXT-HD-SL-444 User Manual page 60

Operating the 4x4 Seamless Matrix for HDMI
Use the ▲ or ▼ buttons to highlight the option to change. The UDP Access option
5.
will be highlighted, automatically.
6. Once the desired option is highlighted, press the Select button to select it. If using the
IR remote control, press the OK button.
When an option is selected, its current value will be highlighted in orange.
U D P S E T T I N G S
U D P A C C E S S
U D P P O R T
R E M O T E U D P A D D R I P
B Y T E 1
B Y T E 1
B Y T E 1
B Y T E 1
R E M O T E U D P P O R T
B A C K
E X I T
7. Use the ◄ or ► buttons to change the current value.
8. Press the Select button to accept the current changes. If using the IR remote control,
press the OK button.
Enables or disables UDP access to the HD Video Wall Controller.
Sets the UDP port for the 4x4 Seamless Matrix for HDMI.
Use the Byte1, Byte2, Byte3, and Byte4 options to set the IP address of the digits in the
UDP IP address, subnet mask, and gateway.
Sets the remote UDP listening port for the 4x4 Seamless Matrix for HDMI.
E N A B L E
5 0 7
1 9 2
1 6 8
2
2 1 3
5 0 8
UDP Access
UDP Port
Byte
Remote UDP Port
page | 50
Menu System