Routing Inputs To Outputs - Gefen EXT-HD-SL-444 User Manual

Operating the 4x4 Seamless Matrix for HDMI
To change the routing state of an output, press and release the button of the desired output
to advance to the next input.
In the illustration below, the source connected to Input 2 is currently routed to Output 2.
For this example, we will route Input 4 to Output 2.
1. Select output 2 by pressing button Output 2. The LED for Input 2 is illuminated, indi-
cating that Input 2 is currently routed to Output 2.
2. Press button Output 2, twice.
Input 4 is selected
3. The LED indicator for Input 4 is now illuminated. This indicates that Input 4 is now
routed to Output 2.
Once an output is selected, it will remain illuminated until another output is selected.
An output must be selected before making a routing change.

Routing Inputs to Outputs

Using the Front Panel Buttons
page | 14
Routing Basics
Output 2 is selected