Table of Contents
Advertisement
Operating the 4x4 Seamless Matrix for HDMI
We'll use with the same routing example that is outlined on the previous page.
However, instead of using the buttons on the front panel, we will use the IR remote control.
Input 2 is routed to Output 2. We will use the IR remote to route Input 4 to Output 2.
1.
Point the IR remote at the IR sensor on the front panel of the matrix.
2.
Select the desired output. In this example, we will select Output 2. Always select the
output before selecting the input.
Press In 4
3.
Select the desired input. In this example, we will select Input 4.
Input 4 is selected
4.
The LED indicator for Input 4 is now illuminated. Input 4 is now routed to Output 2.
Using the IR Remote Control
page | 15
Routing Basics
Press Out 2
- Quick Links:
- Rs-232 and Ip Configuration
Hide quick links:
Advertisement
Table of Contents
