Xerox WorkCentre PE16 Service Manual page 52

Disassembly and Reassembly
5.9 Engine Shield Ass'y
1. Before you remove the Engine Shield Ass'y, you
should remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
- Scanner (see page 5-5)
2. Remove the two screws securing and unplug the FPC
cable From the Main PBA. Then remove the LIU PBA
3. Unplug the two connectors.
Fan Connector
Service Manual
5-12
July 2003
LIU PBA
Thermistor connector
4. Remove the ten screws securing the Engine Shield
Ass'y and remove it. Then unplug the all the connec-
tors from the Main PBA and SMPS.
Engine Shield
Ass'y
WorkCentre PE16