Clearing Paper Jams; Bypass Jam - Xerox WorkCentre PE16 Service Manual

6.2 Clearing Paper Jams

Occasionally, paper can be jammed during a print job. Some of the causes include:
• The tray is loaded improperly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Paper was used that does not meet paper specifications.
• Paper that is outside of the supported size range was used.
If a paper jam occurs, the On Line/Error LED on the control panel lights red. Find and remove the
jammed paper. If you don't see the paper, open the covers.
Do not use a tweezers or a sharp metal tool when removing a jam.
The covering of a metal part can be removed which can cause an electric leakage.
Fuser
PR
Paper Jam0
Fuser
PR
Paper Jam2
WorkCentre PE16
L S U
Toner Cartridge
CR
DR
OPC
SR
PTL
TR FR
L S U
Toner Cartridge
CR
DR
OPC
SR
PTL
TR FR
ALIGNMENT & A D J U S T M E N T S
Fuser
PR
Paper Jam1
L S U
Fuser
CR
OPC
PR
TR

Bypass Jam

L S U
Toner Cartridge
CR
DR
OPC
SR
PTL
TR FR
Toner Cartridge
DR
SR
PTL
FR
Service Manual
July 2003