General Guidelines - Xerox WorkCentre PE16 Service Manual

Service Safety Summary

General Guidelines

Note
The material presented here is intended as a safety reminder for qualified service
personnel. Refer also to the preceding Power Safety Precautions.
Avoid servicing alone:
product unless another person capable of rendering first aid or resuscitation is present.
Use care when servicing with power:
points in this product. To avoid personal injury, do not touch exposed connections and
components while power is on. Disconnect power before removing the power supply
shield or replacing components.
Do not wear jewelry:
Remove jewelry prior to servicing. Rings, necklaces and
other metallic objects could come into contact with dangerous voltages and currents.
Power source:
This product is intended to operate from a power source that will
not apply more then 264 volts rms for a 220 volt AC outlet or 140 volts rms for a 110
volt AC outlet between the supply conductors or between either supply conductor and
ground. A protective ground connection by way of the grounding conductor in the
power cord is essential for safe operation.
Warning Labels
Read and obey all posted warning labels. Warning labels are displayed on potentially
dangerous printer components. As you service the printer, check to make certain that
all warning labels remain in place.
Safety Interlocks
Make sure all covers and the products's front panel are in place and all interlock
switches are functioning correctly after you have completed a unit service call. If
you bypass an interlock switch during a service call, use extreme caution when
working on or around the product.
WorkCentre PE16
Do not perform internal service or adjustment of this
Dangerous voltages may exist at several
Precautions
Service Manual
1-5
July 2003