Xerox WorkCentre PE16 Service Manual page 58

Disassembly and Reassembly
5.14 LSU
1. Before you remove the LSU, you should remove:
- Rear Cover (see page 5-2)
- Side Cover (LH, RH) (see page 5-3)
- Scanner Ass'y (see page 5-5)
- Front Cover (see page 5-4)
- Middle Cover (see page 5-11)
2. Unplug the two connectors.
5.15 Drive Ass'y
1. Before you remove the Drive Ass'y, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover (LH) (see page 5-3)
2. Remove the six screws securing the Drive Ass'y.
Service Manual
5-18
July 2003
3. Remove the three screws securing the LSU and
remove it.
3. Take out the Drive Ass'y, then unplug the connector
from the Main PBA, as shown below.
Drive Ass'y
LSU
WorkCentre PE16