Xerox WorkCentre PE16 Service Manual page 103

7.4.5 Defective FAX RECEIVE (1)
• Description SEND is functioning, but RECEIVE is not functioning or the received data are broken.
Check and Cause
1. Check if there is NOISE when pressing on-hook
dial.
2. Check the RECEIVE condition by receive a FAX at
another fax machine.
7.4.6 Defective FAX RECEIVE (2)
• Description The received data are lengthened or cut in the printing.
Check and Cause
1. Check if there is noise when pressing on-hook
dial.
2. Ask to the sending side, to check the image quality
of a FAX received from another machine.
7.4.7 Defective FAX RECEIVE (3)
• Description The phone is ringing continuously, but it cannot receive.
Check and Cause
Check if the RECEIVE Mode is TEL MODE or FAX
MODE.
WorkCentre PE16
Solution
1. If NOISE is present while on-hooking, replace the tele-
phone line cord.
Solution
1. If noise is present, replace the telephone line cord.
(Refer to 'Defective FAX RECEIVE'.)
2. Check if the FAX status of the sending side is normal.
Solution
After the RECEIVE mode is changed to FAX MODE, if it
cannot receive, replace the LIU PBA and the Main PBA in
sequence.
Troubleshooting
Service Manual
7-19
July 2003