Xerox WorkCentre PE16 Service Manual page 43

5.3 Side Cover (LH, RH)
1. Before you remove the Side Cover (LH, RH), you
should remove:
- Rear Cover (see page 5-2)
2. Unplug the Speaker Harness, as shown below.
WorkCentre PE16
Speaker
Harness
Disassembly and Reassembly
3. Pull down and back on the LH and RH Side Covers
and lift them out in the direction of the arrows.
Side Cover(LH)
Side Cover(RH)
Service Manual
5-3
July 2003