Defective Adf - Xerox WorkCentre PE16 Service Manual

Troubleshooting
7.1.7 Paper rolled in the OPC
• Description Paper is rolled up in the OPC.
Check and Cause
1. Paper is out of specification.
2. Paper is curled.

7.1.8 Defective ADF

• Description ADF (Automatic document Feeder) is not operating properly.
Check and Cause
1. Check if ADF rubber and HOLDER rubber are dam-
aged.
2. Check if the document sensors of ADF Ass'y
(3 paper sensors) are normal.
Service Manual
7-4
July 2003
Solution
1. Use recommend paper.
2. How to remove the rolled paper in the OPC.
• Remove the paper while turning the OPC against
the ongoing direction.
• Clean fingerprints on the OPC softly with soft
cloth dampened with IPA(Isopropyl Alcohol) or tis-
sue.
Solution
1. Replace the contaminated or damaged part.
2. Replace the ADF ASS'Y.
WorkCentre PE16