Defective Automatic Receiving - Xerox WorkCentre PE16 Service Manual

Troubleshooting
7.4.8 Defective FAX RECEIVE (4)
• Description The received data is reduced by more than 50% in the printing.
Check and Cause
Check the FAX status of the sending side.

7.4.9 Defective Automatic Receiving

• Description The automatic receiving function is not working.
Check and Cause
1. Check if the RECEIVE Mode is TEL MODE or FAX
MODE.
Service Manual
7-20
July 2003
Solution
After checking the data of the sending side, correct the
FAX of the sending side.
Solution
1. If the RECEIVE Mode is set to the TEL MODE, reset it
to the FAX MODE.
2. After the RECEIVE mode is changed to FAX MODE, if
it cannot receive, replace the LIU PBA and the Main
PBA in sequence.
WorkCentre PE16