Safety System - Husqvarna Rider ProFlex 21 II Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Safety System

The rider is equipped with a safety system that prevents starting or driving under the following conditions.
It should only be possible to start the engine when the cutting unit is in its raised position and the hydrostat
pedals are in the neutral position.
The driver does not need to be seated in the driver's seat.
Check daily to ensure that the safety system works by attempting to start the engine when one of the
conditions is not met. Change the conditions and try again.
Check that the engine stops if you temporarily move out of the driver's seat while the cutting unit is lowered
or the hydrostat pedals are not in the neutral position.
Microswitch: Cutting Unit
See Adjusting the Lever Housing on page 56
for adjustment instructions.
ELECTRICAL SYSTEM
Starter
Ignition system
www.mymowerparts.com
Works
Does not work
Microswitch, cutting unit
8009-153
8009-381
75
English-