Husqvarna AUTOMOWER 210 C Quick Manual

4 LINKING AUTOMOWER™ TO THE LOOP GENERATOR/CHARGER
See chapter 3.7 in the Operator's Manual
1. Connect the loop generator/charger charging cable to the
mower's charger contact. The boundary loop must be
connected to a mains connected loop generator/charger.
2. Set the main switch to ON position.
3. Select and enter a four digit PIN code. All combinations
except 0000 are permitted.
4. Press the YES button.
5. Confi rm the selected PIN code by re-entering the PIN
code.
6. Press the YES button.
When you have selected a PIN code, the mower and loop
generator/charger are linked to each other and the mower
can be operated.
5 STARTI NG AN D STOPPI NG AUTOMOWE R™
See chapters 4.1 and 4.2 in the Operator's Manual.
STARTING
1. Open the control panel cover by pressing the STOP
button.
2. Set the main switch to ON position.
3. Enter the PIN code, confi rm with the YES button.
4. Close the cover.
STOPPING
Press the STOP button.
USE
Automower™ is recommended for lawns up to 500 m² /
0.12 acre. The size of the working area the mower can
handle depends on how much it is used. The larger the lawn
the more occasions per week Automower™ can work.
AUTOMOWER™ is a trademark owned by Husqvarna AB. Copyright © 2008 HUSQVARNA. All rights reserved.
www.Automower™.com
115 13 03-26
1
2
3
2
3
4
QUIC K GUI DE
H USQVARNA AUTOMOWE R
210 C
™