Husqvarna Rider ProFlex 21 II Workshop Manual page 42

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
10. Cleaning, see Working Methods on
page 78. Loosen the hydraulic hoses
from the hydrostatic transmission.
11. Loosen the steering cables (1) and
remove the steering collar.
12. Remove the belt pulley (B). Move the
lower part forwards, the upper part
backwards, and force the pulley out.
!
WARNING!
The centre spring is under
extremely high tension and can
cause injuries if it flies off.
Wear protective eyewear and
gloves when removing or fitting
the spring.
13. Loosen the centre spring. This spring is
under high tension and should be
secured with the help of tool number 506
89 93-01 before the nut is removed.
14. Remove the inner circlip (1) by the lower
bearing (see illustration). The rear
carriage is now loose and can be moved.
Then loosen the outer circlip (2) and
remove the bearings from below.
40
English-
REPAIR INSTRUCTIONS
www.mymowerparts.com
Hydraulic hoses
Steering cables and belt pulley
Centre spring mount
Lower bearings
8009-366
8009-367
6012-026
6012-027