Husqvarna Rider ProFlex 21 II Workshop Manual page 33

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
7. Press the fuel hose into place against the
fuel pump and attach the hose clamp.
8. Screw the cable from the starter to the
start relay into place.
Attach the engine's electrical connectors.
IMPORTANT INFORMATION
Hold the battery cable bolts in place so
that the electrodes are not strained.
9. Lift the battery into position and attach the
cable connectors and cover, tighten the
fastening strap.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Fuel pump
The engine's electrical connections
Battery installation
8009-191
8009-190
6012-092
31
English-