Husqvarna Rider ProFlex 21 II Workshop Manual page 91

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Brake linkage
Brake does not work
satisfactorily
Brake pad
Hydrostatic transmission
The machine moves even in
neutral
Accelerator
Hydrostatic transmission
Difficult to change gear
Accelerator
The machine cannot be towed
Bypass valve
or pushed
The hydrostatic transmission must not be opened while under guarantee.
Damaged or wrongly adjusted
Worn out or soaked in oil
Internal fault, for example, gear
shaft
Wrongly adjusted or jamming
Oil level too low
Internal fault, for example, gear
shaft
Wrongly adjusted or jamming
Bypass valve only partly activated
Linkage damaged or jamming
Internal fault in hydrostatic
transmission
www.mymowerparts.com
Replace linkage and adjust to
right setting
Replace brake pad
Repair or replace hydrostatic
transmission
Lubricate and adjust
Fill with engine oil SAE 10W/30
to right level
Repair or replace hydrostatic
transmission
Lubricate and adjust
Pull out control fully
Replace damaged parts. Adjust
Repair or replace hydrostatic
transmission