Husqvarna Rider ProFlex 21 II Workshop Manual page 16

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
DELIVERY AND DEALER SERVICE
Packaging and Unpacking
The machine is normally packed using special packaging when delivered from the factory. This packaging
is comprised of a wood base with a strong cardboard top section, all held together with plastic wrapping.
!
WARNING!
Handle the transport box carefully.
Keep the goods as flat as possible.
Use long forks to lift from the short side.
The base is fitted with pallet feet and the goods can be handled with a normal forklift truck from the long
side. In order to keep the goods as flat as possible, two people ought to help the truck driver. Lift and then
drive the truck carefully.
Break the plastic wrapping and remove the cardboard packaging.
The machine then stands on the base with the brakes on and is secured with wooden blocks.
Check that the machine has not been damaged during transport when the packaging is opened.
Any damage should be reported to the transport company as per routine.
The packaging shall not be returned.
Lifts from the short side, see illustration,
require long pallet forks.
Packed components
The following components are contained
in the transport box:
Number Component
1 pc Steering wheel with steering rod
1 pc Allen screw for steering rod
1 pc Lock nut for steering rod
6 pcs Battery plugs
1 pc Operator's Manual
1 pc Owner's Manual, Kawasaki
2 pcs Wheel weights (Accessory, fitted to the rear wheels)
4 pcs Wheels (certain markets)
14
English-
www.mymowerparts.com
Long pallet forks are required
8009-124