Removing The Belt; Attaching The Belt - Husqvarna Rider ProFlex 21 II Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Removing the Belt

Starting position for removing the belt:
• No unit is attached to the machine.
• The belt's forward part is hung around
the handle of the safety catch.
Detaching the forward part of the belt from
the forward pulley is described in points 5-8
under Removing the Cutting Unit on page 65.
The entire belt is removed according to the
following only when a snow blade is to be
attached to the machine.
1. Press the guide plate under the anti-
scalp roller.
2. Unhook the spring to the blade brake.
3. Remove the belt from the centre pulley
and remove the belt.

Attaching the Belt

1. Place the forward part of the belt in place
and hang the forward part around the
handle of the safety catch.
2. Put the belt on the centre pulley and
against the anti-scalp roller.
3. Press the guide plate down under the
anti-scalp roller and push the belt into
place.
58
English-
REPAIR INSTRUCTIONS
www.mymowerparts.com
Press down the guide plate
Blade brake spring
Forward part of the belt
Press down the guide plate
8009-343
8009-005
8009-009
8009-343