Husqvarna Rider ProFlex 21 II Workshop Manual page 51

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
5. Follow the hydrostatic transmission cable
backwards towards the hydrostatic
transmission and cut the plastic tie
around the cable.
6. Remove the locking spring by the
hydrostatic transmission cable's rear link
joint. Loosen the clamp under the left
drive shaft.
7. Lift off the link joint and pull out the cable.
8. Lift out the hydrostatic transmission
cable and the accompanying link joint.
9. Unscrew both link joints from the
hydrostatic transmission cable.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Cut the plastic tie
Rear link joint
Lift off the link joint
Remove the link joints.
8009-204
8009-222
6019-016
6019-017
49
English-