Fitting The Hydrostatic Transmission Cable - Husqvarna Rider ProFlex 18 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
10. Remove the entire hydrostatic transmission
cable.
Fitting the Hydrostatic Transmission
Cable
1. Screw in the front link joint on the new
hydrostatic transmission cable and tighten
the lock nut.
2. Run the cable through the rider so that it
follows the same path as the old cable did.
3. Press in the cable casing in the forward
fastener in the centre bracket.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Remove the hydrostatic transmission cable.
Front link joint
Threading the cable
Forward mount in centre bracket
6019-009
6019-018
6019-022
6019-023
51
English-