Husqvarna Rider ProFlex 18 Workshop Manual page 58

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Hydrostatic transmission type K66 ProFlex 21
The transmission holds 2.5 litres (2.6 US qt)
(SAE10W/30 engine oil, class SF-CC).
The hydrostatic transmission filter and
hydraulic filter should be changed when oil
changes are performed.
• Remove the drain plug from the drainage
hole and the filter.
• Loosen the hose to the transmission oil
tank from the hydrostatic transmission.
• Remove the hexagonal plug from the fill
hole at the front of the top of the
transmission.
• Refit the filter and the drain plug. Fill with
oil through the fill hole. Replace the hose
and fill the oil tank.
Bleed the transmission and the hydraulic
system, see "Bleeding the Hydrostatic
and Hydraulic Systems" on page 54.
• Test run the machine and fill with oil to
the proper level in the oil tank.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Drainage hole with filter
Fill hole
6020-003
8009-049
57
English-