Replacing The Light Bulbs - Husqvarna Rider ProFlex 18 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Replacing the light bulbs

For information about the bulb type, see
"Electrical system" on page 5.
1. Unscrew the two screws holding the
cover on the power servo housing.
Lift up the cover and turn it around the
steering shaft.
2. Unscrew the two screws holding the
lamp insert.
Lift out the lamp insert.
3. Disconnect the cables from the bulbs.
4. Lift out the bulbs from the insert.
5. Insert the new bulbs. Make sure you use
your thumb to support the front.
6. Refit the cables, lamp insert and the
cover on the power servo housing.
78
English-
ELECTRICAL SYSTEM
www.mymowerparts.com
8009-511
8009-512
8009-513
8009-522