Husqvarna Rider ProFlex 18 Workshop Manual page 29

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
8. Loosen the cover plate over the muffler,
two screws on each side of the muffler,
and remove the plate.
9. Loosen the exhaust pipe's pipe clamp
and the muffler's four fastening screws.
Then remove the muffler, exhaust pipe,
and accompanying pulse air valve.
10. Remove the cable holder under the
engine belt pulley.
11. Push tool no. 506 56 06-01 into the
centre of the engine belt pulley. Loosen
and remove the Allen screw that holds
the belt pulley and engine shaft together.
Use tool no. 506 89 92-01 to counter.
Loosen the belt pulley from the engine
shaft.
28
English-
REPAIR INSTRUCTIONS
www.mymowerparts.com
Muffler cover plate
Exhaust system
Cable holder
Engine belt pulley
8009-035
8009-193
8009-364
506 56 76-01
8009-194