Husqvarna Rider ProFlex 18 Workshop Manual page 41

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
10. ProFlex 21
Clean, see "Working Methods" on
page 82. Loosen the hydraulic hoses
from the hydrostatic transmission.
11. Loosen the steering cables (1) and
remove the steering collar.
12. Remove the belt pulley (B). Move the
lower part forwards, the upper part
backwards, and force the pulley out.
!
WARNING!
The centre spring is under
extremely high tension and can
cause injuries if it flies off. Wear
protective eyewear and gloves
when removing or fitting the
spring.
13. Loosen the centre spring. This spring is
under high tension and the load should
be relieved with the help of tool number
506 89 93-01.
14. Remove the screw for the centre spring's
rear mounting after the load on the
spring has been relieved.
40
English-
REPAIR INSTRUCTIONS
www.mymowerparts.com
Hydraulic hoses
Steering cables and belt pulley
Relieving load on centre spring.
The centre spring's rear mounting
8009-366
8009-367
8009-517
6012-026