Removing The Unit Frame; Belt Replacement On Cutting Units Combi 112 And Combi 122 - Husqvarna Rider ProFlex 18 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

Removing the Unit Frame

!
WARNING!
Exercise caution.
Risk of crush injuries.
Starting position for removing the cutting
unit frame:
Cutting unit removed.
1. Twist the catch out so that the forward
fastener can be lifted from the cutting
unit.
2. Move the unit frame backwards so that
the tongue of the cutting unit releases its
grip on the bar of the unit frame and lift
the frame off.
Assemble the parts in the reverse order.
Belt replacement on cutting units
Combi 112 and Combi 122
On cutting units with 'collision-proof' blades,
the blades are driven by a V-belt. Do as
follows to replace the V-belt:
1. Loosen the unit frame (1), the bolt to the
parallelism strut (2), and the two screws
on the cover (3). Lift off the cutting unit
cover.
2. Loosen the spring (4) that tensions the
V-belt and pull the belt off.
Attach a new belt in the reverse order.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Unit frame lock
Tongue and handle
3
Removing the cover
Belt tensioner spring
8009-184
8009-185
3
1
2
6016-113
8009-376
69
English-