Husqvarna Rider ProFlex 18 Workshop Manual page 69

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
9. Unhook the height adjustment strut (E)
by moving the rear part upwards:
Unload the strut if necessary by pulling
the frame's forward section up or down.
10. Pull the handle (D) and unit
simultaneously. Release the handle
when the unit has come out a bit.
11. Pull out the unit so that it catches on the
outer hooks.
12. Lower the unit with the mechanical lifting
lever.
Pull the handle (D) so that the safety catch
locks. Check that the catch (A) is in the inset
position.
13. Remove the unit from the machine.
68
English-
REPAIR INSTRUCTIONS
www.mymowerparts.com
Height adjustment strut
Pull forward
Pull to the stop position
Locking the safety catch
8009-169
8009-170
8009-024
8009-171