Replacing The Centre Belt - Husqvarna Rider ProFlex 18 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
4. Hook the spring to the blade brake.
Attaching the belt to the forward pulley is
described in points 6-8 under Attaching the
Cutting Unit, page 63.

Replacing the Centre Belt

1. Detach the front belt from the centre
pulley as described above.
2. Remove the centre belt and mount a new
belt.
3. Adjust the belt guide against the lower
belt in the belt pulley as needed.
4. Check and adjust the belt adjuster, se
illustration "Basic measurements, belt
adjuster" on page 59. This is especially
important when fitting a new belt, since
stretching of the old belt may have been
compensated for by changing the setting
of the belt adjuster.
5. Replace the front belt as described
above.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Blade brake spring
Belt guide
8009-005
8009-264
61
English-