Table of Contents
Advertisement
CLI Command
shutdown
set interface active {ethernet interface | port-channel port-channel-
number}
port security <options> trap frequency
show ports security
The following is an example of the CLI commands:
From 18.1.16 Console # show ports security
Port Action Trap Frequency Counter
---------------------------------------------
5/7 Discard Enable 100 88
7/8 Discard Disable
Defining IP-Based ACLs
The Add ACE to IP Based ACL page allows network administrators to define IP-based Access Control Lists (ACLs) and Access Control Entries (ACEs). ACEs act
as filters to match packets to forwarding criteria. To open the Add ACE to IP Based ACL page:
Select Switch > Network Security > IP based ACL. The Add ACE to IP Based ACL page opens.
l
Description
Disables interfaces.
Reactivates an interface that is shutdown due to port security
reasons.
Locks learning of new addresses on an interface.
Displays port lock status.
Advertisement
Table of Contents
