UDP to Queue Page
The UDP to Queue page contains the following fields:
Select UDP from the List—Provides a drop-down list of predefined commonly used UDP ports.
l
Insert UDP Port—A new UDP port may be defined.
l
Map to Queue—Indicates the traffic queue to which the UDP port is assigned.
l
NOTE:
In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore, assigning additional traffic to Queue 4 may interfere with
stack control.
Remove—Removes UDP port mapping.
l
Checked—Removes a UDP port mapping.
¡
Unchecked—Maintains a UDP port mapping.
¡
Assigning a UDP port to a Traffic Queue:
1. Open the UDP to Queue page.
2. Select a port in the UDP Port List.
Or
Check the Insert UDP Port check box. The New UDP Port field is enabled.
Define a new UDP port.
3. Select a queue number in the Map to Queue drop-down list.
4. Click Apply Changes. The UDP port is assigned a forwarding queue.
Modifying a UDP Port to Traffic Queue Setting:
1. Open the UDP to Queue page.