Table of Contents
Advertisement
Port Configuration
The Port Configuration page contains the following fields:
Port—Specifies the port number.
l
Description—Provides a brief interface description, for example Ethernet.
l
Port Type—Indicates the port type. The possible field values are:
l
Ethernet
¡
Fast Ethernet
¡
GE
¡
Admin Status—Controls the selected port traffic. By default, this parameter is set to Enable. The possible field values are:
l
Up—Enables traffic forwarding through the port.
¡
Down—Disables traffic forwarding through the port.
¡
Current Port Status—Specifies the port operational status. The possible field values are:
l
Up—Indicates the port is currently operating.
¡
Down—Indicates the port is currently non-operational.
¡
Re-Activate Suspended Port—Reactivates a port if the port has been disabled through the Locked Port or ACL security options.
l
Operational Status—Indicates the port operational status.
l
Admin Speed—Specifies at what rate the port is running. This value can be specified only if the port is disabled. The possible field values are:
l
10M
¡
100M
¡
1000M
¡
Current Port Speed—Specifies the synchronized port speed in bps. The possible field values are:
l
10M
¡
100M
¡
1000M
¡
Advertisement
Table of Contents
