Deleting VLANs:
1. Open the VLAN Membership page.
2. Select a VLAN from the Show VLAN drop-down list.
3. Check the Remove check box.
4. Click Apply Changes. The VLAN group is deleted, and the device is updated.
Assigning Ports to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to VLAN groups as displayed in the VLAN Membership page.
CLI Command
vlan database
vlan {vlan-range}
interface vlan vlan-id
name string
interface range ethernet {port-range | all}
switchport forbidden vlan {add vlan-list | remove vlan-list}
The following is an example of the CLI commands:
Console # vlan database
Console (config-vlan)# vlan 1972
Console (config-vlan)# exit
Console (config)# interface vlan 1972
Console (config-if)# name Marketing
Console (config-if)# exit
Console (config)# interface range ethernet 1/e18 - e20
Defining VLAN Ports Settings
The VLAN Port Settings page provides parameters for managing ports that are part of a VLAN.
Description
Enters the interface configuration (VLAN) mode.
Creates or deletes a VLAN.
Enters the interface configuration (VLAN) mode to configure an existing VLAN.
Adds a name to a VLAN.
Enables command execution on multiple ports at the same time.
Forbids adding specific VLANs to the port