Dell PowerConnect 3324 User Manual page 129

Remove—Removes a bridge multicast group specified by its address.
l
Checked—Removes the bridge multicast address.
¡
Unchecked—Maintains the bridge multicast address.
¡
Ports Table—Lists the port that can be added to a multicast service.
l
LAGs Table—Lists the LAGs that can be added to a multicast service.
l
The IGMP Port/LAG Members Table figure displays IGMP Port/LAG member status.
IGMP Port/LAG Members Table
The IGMP Port/LAG Members Table Control Settings Table contains the settings for managing IGMP port and LAG members.
Port Definition
Control
D Indicates that the port/LAG has joined the multicast group dynamically in the Current row.
S Attaches the port to the multicast group as static member in the Static Row. Indicates that the port/LAG has joined the Multicast group
statically in the Current row.
F Indicates that the port is forbidden to join this multicast group.
Blank Indicates that the port is not attached to the multicast group.
IGMP Port/LAG Members Table Control Settings
Defining ports to receive multicast service:
1. Open the Bridge Multicast page.
2. Define the VLAN ID and the Bridge Multicast Address fields.
3. Toggle a port to S to join the port to a selected multicast group, or Toggle a port to F to forbid the port from joining that multicast group.
4. Click Apply Changes. The port is assigned to the multicast group, and the device is updated.
Assigning LAGs to receive multicast service:
1. Open the Bridge Multicast page.
2. Define the VLAN ID and the Bridge Multicast Address fields.
3. Toggle the LAG to S to join the LAG to the selected multicast group, or toggle a port to F to forbid the port from joining a multicast group.
4. Click Apply Changes. The LAG is assigned to the multicast group, and the device is updated.
Managing Multicast Service Members Using CLI Commands
The following table summarizes the equivalent CLI commands for managing multicast service members as displayed in the Bridge Multicast Group page.
CLI Command
bridge multicast address {mac-multicast-address | ip-multicast-address} {add | remove}
{ethernet interface-list | port-channel port-channel-number-list}
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-
multicast-address] [format ip | mac]
Description
Registers MAC-layer multicast addresses to the bridge
table, and adds static ports to the group.
Displays multicast MAC address table information.