Console (config)# interface range ethernet 1/e18 - e20
Console (config-if)# switchport mode access
Console (config-if)# switchport general pvid 234
Console (config-if)# switchport general allowed vlan add 1,2,5,6 tagged
Console (config-if)# switchport general ingress-filtering disable
Defining VLAN LAG Settings
The VLAN LAG Settings page provides parameters for managing LAGs that are part of a VLAN. VLANs are composed of individual ports or LAGs. Untagged
packets entering the switch on a LAG are tagged as specified by the LAG's PVID. To open the VLAN LAG Settings page:
Click Switch > VLAN > LAG Settings in the Tree View. The VLAN LAG Settings page opens.
l
VLAN LAG Setting Page
The VLAN LACP Parameters page contains the following fields:
LAG—Indicates the LAG number included in the VLAN.
l
Port Mode—Indicates the port mode. The possible field values are:
l
General—Indicates that the LAG belongs to one or more VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q compliance).
¡