The Modify Enable Password page contains the following fields:
Select Enable Access Level—Specifies the access level associated with the Enable password.
l
Password—Indicates the Enable password.The password is displayed as *******.
l
Confirm Password—Confirms the new Enable password. The confirmed password is displayed as *******.
l
Defining a new Enable Password:
1. Open the Modify Enable Password page.
2. Define the Select Enable Access Level, Password, and Confirm Password fields.
3. Click Apply Changes. The new Enable password is defined, and the device is updated.
Assigning Enable Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the Modify Enable Password page.
CLI Command
enable password [level level] password [encrypted] Sets a local password to control access to user and privilege levels.
show users accounts
The following is an example of the CLI commands:
Console (config)# enable password level 15 dell
Console# show users accounts
Username Privilege
--------- ---------
Bob 15
Robert 15
Configuring RADIUS Global Parameters
Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks. RADIUS servers provide a centralized authentication
method for:
Telnet Access
l
Web Access
l
Console to Switch Access
l
To open the RADIUS Settings page:
Click System > Management Security >RADIUS in the Tree View. The RADIUS Settings page opens.
l
Description
Displays information about the local user database.