The Line Passwords page allows network managers to define line passwords for management methods. Passwords are limit to maximum of 16 characters. To
open the Line Passwords page:
Click System > Management Security > Line Passwords in the Tree View. The Line Password page opens.
l
Line Password Page
The Line Password page contains the following fields:
Line Password For Console—Specifies the line password for accessing the device via a console session. The password is displayed as *******.
l
Line Password For Telnet—Specifies the line password for accessing the device via a Telnet session.The password is displayed as *******.
l
Line Password For Secure Telnet—Specifies the Line Password for accessing the device via a Secure Telnet session. The password is displayed as
l
*******.
Defining line passwords for console sessions:
1. Open the Line Password page.
2. Define the Line Password for Console field.
3. Click Apply Changes. The line password for console sessions is defined, and the device is updated.
Defining line passwords for Telnet sessions:
1. Open the Line Password page.
2. Define the Line Password for Telnet field.
3. Click Apply Changes. The line password for the Telnet sessions is defined, and the device is updated.
Defining line passwords for secure Telnet sessions: