Table of Contents
Advertisement
Copy Files Page
The Copy Files page contains the following fields:
Copy Master Firmware—Copies either the Software Image and/or Boot Code from the master unit to a selected stacking unit.
l
Source—Copies either the Software Image or Boot Code files to the selected stacking unit.
¡
Destination Unit—Indicates the stacking unit to which the Software Image or Boot Code is copied.
¡
Copy Configuration—Copies either the Running Configuration, Startup Configuration or Backup Configuration files to the Startup Configuration or
l
Backup Configuration files.
Source—Indicates either the Running Configuration, Startup Configuration, or Backup Configuration files to copy to the selected stacking unit.
¡
Destination—Indicates the configuration to overwrite, either the startup configuration or backup configuration.
¡
Restore Configuration Factory Defaults—Restores the Factory Configuration default files by erasing the Startup-Config File. Note that the Backup-Config
l
File is not erased. The possible field values are:
Checked—Restores the factory defaults.
¡
Unchecked—Maintains the current configuration settings.
¡
Copying Files:
1. Open the Copy Files page.
2. Select either the Copy Configuration or Copy Master Firmware field.
3. Define the Source and Destination fields for the file.
4. Click Apply Changes. The file is copied, and the device is updated.
Restoring Company Factory Default Settings:
1. Open the Copy Files page.
2. Select the Restore Company Factory Defaults fields.
3. Click Apply Changes. The company factory default settings are restored, and the device is updated.
Advertisement
Table of Contents
