GVRP Parameters Page
The GVRP Parameters page contains the following fields:
GVRP Global Status—Enables GVRP on the device. The possible field values are:
l
Enabled—Indicates GVRP is enabled on the device.
¡
Disabled—Indicates GVRP is disabled on the device. This field value is the default.
¡
Interface—Indicates the specific interface for which GVRP is enabled. The possible field values are:
l
Port—Indicates the specific port for which GVRP is enabled.
¡
LAG—Indicates the specific LAG for which GVRP is enabled.
¡
GVRP State—Indicates if GVRP is enabled on a port. The possible field values are:
l
Enable—Enables GVRP on the interface.
¡
Disable—Disables GVRP on the interface. This is the default value.
¡
Dynamic VLAN Creation—Enables VLAN creation through GVRP. The possible field values are:
l
Enable—Enables creating VLANs through GVRP.
¡
Disable—Disables creating VLANs through GVRP.
¡
GVRP Registration—Enables GVRP registration status. The possible field values are:
l
Enable—Enables VLAN registration through GVRP.
¡
Disable—Disables VLAN registration through GVRP.
¡
Enabling GVRP on the device:
1. Open the GVRP Parameters page.
2. Select Enable in the GVRP Global Status field.
3. Click Apply Changes. GVRP is enabled on the device.