Methods Of Managing The Switch; Cli (Command Line Interface); Using The Console Port - Hitachi US7070447-001 Troubleshooting Manual

Hitachi's HiSpeed switch can be managed using the following:

CLI (Command Line Interface)

Hitachi employes a command line interface (CLI) application for configuring the
HiSpeed switch. The CLI can be accessed from:

Using the Console Port

Connect a terminal to the HiSpeed switch using a null-modem RS-232 serial
cable. A DOS/Windows or Unix workstation running in terminal emulation mode
can also be used. The console port on the switch is configured as DCE, which
requires the use of a null-modem cable. Because the connection is a male DB9
interface, your cable should be a female DB9 connector on the other end.
Doc Part Number, Version Number

Methods of Managing the Switch

Serial connection on the console port
Telnet session over a TCP/IP network
SNMP using HiView's Graphical User Interface (GUI)
Console Port
Telnet session
Chapter 6
1
6-