List Of Maintenance-Mode Functions - Brother DCP-9040CN Service Manual

1.3

List of Maintenance-mode Functions

Function
Code
01 EEPROM Parameter Initialization
05 Printout of Scanning Compensation Data
06 Placement of Scanner Unit Position for Transportation
08 ADF Performance Test
09 Test Pattern
10 Worker Switch (WSW) Setting
11 Printout of Worker Switch Data
12 Operational Check of LCD
13 Operational Check of Control Panel Button
25 ROM Version Check
31 Drum Unit Cleaning
32 Operational Check of Sensors
45 Switching of the USB Transfer Speed in the PictBridge Mode
52 EEPROM Customizing (User-accessible)
53 Received Data Transfer Function
54 Fine Adjustment of Scan Start/End Positions
55 Acquisition of White Level Data
66 Adjustment of Color Registration
67 Paper Feeding and Ejecting Test
72 Sensitivity Adjustment of Density Sensor
74 EEPROM Customizing
75 Sensitivity Adjustment of Registration-mark Sensor
77 Printout of Maintenance Information
78 Operational Check of Fans
80 Display of the Machine's Log
82 Error Code Indication
83 Developing Bias Voltage Correction
87 Output of Transmission Log to the Telephone Line
91 EEPROM Parameter Initialization
99 Exit from the Maintenance Mode
--- Cancellation of the Memory Security Mode (Not applicable
to the Japanese version)
Function
(Don't use)
* The functions shaded in the table above are user-accessible.
5-2
Refer to:
1.4.1 (5-3)
1.4.2 (5-4)
1.4.3 (5-7)
1.4.4 (5-7)
1.4.5 (5-8)
1.4.6 [1] (5-9)
1.4.6 [2] (5-11)
1.4.7 (5-12)
1.4.8 (5-13)
1.4.9 (5-14)
1.4.10 (5-15)
1.4.11 (5-16)
1.4.12 (5-20)
1.4.13 (5-21)
1.4.14 (5-22)
1.4.15 (5-24)
1.4.16 (5-25)
1.4.17 (5-26)
1.4.18 (5-28)
1.4.19 (5-28)
1.4.20 (5-29)
1.4.21 (5-31)
1.4.22 (5-33)
1.4.23 (5-34)
1.4.24 (5-36)
1.4.25 (5-38)
1.4.26 (5-38)
1.4.27 (5-39)
1.4.1 (5-3)
1.4.28 (5-39)
Confidential