Brother DCP-9040CN Service Manual page 119

(18) Assemble the Side plate LB with the three cup S M3x6 Taptite screws, one cup B M4x12
Taptite screw and one cup S M4x8 Taptite screw.
Taptite, cup S M4x8
Side plate LB
Taptite, cup B M4x12
(Tightening torque:
1.20 ±0.1 N m)
*1
Taptite, cup S M3x6
(19) Catch the Hooks of the Side cover L ASSY with the main body and fix the Side cover L
ASSY with the one cup S M3x8 Taptite screw and three cup B M4x12 Taptite screws.
Note:
When assembling the Side cover L ASSY, pay attention to the Wire support rope.
Taptite, cup B M4x12
(Tightening torque:
0.80 ±0.1 N m)
*1
Hooks
Side cover L ASSY
Taptite, cup S M3x8
*1
Tightening Note:
When tightening the screw, slowly turn it counterclockwise (in the direction to loosen the
screw) with your hand until you feel that the screw is a little dropped in the hole. Then, slightly
turn it clockwise (in the direction to tighten the screw) with your hand and tighten it according
to the specified torque with a screwdriver.
<Left side>
Fig. 2-44
Hook
Hooks
Fig. 2-45
<Left side>
Taptite, cup B M4x12
(Tightening torque: 0.80 ±0.1 N m)
2-27
Wire support rope
*1
Confidential