Brother DCP-9040CN Service Manual page 313

EEPROM Parameter Initialization of Main PCB (Maintenance Mode: Code 01)
Refer to "1.4.1 EEPROM Parameter Initialization" in Chapter
EEPROM parameter Initialization of main PCB.
Operational Check of Control Panel Button (Maintenance Mode: Code 13)
Refer to "1.4.8 Operational Check of Control Panel Button" in Chapter
the operational check of control panel PCB.
Operational Check of Sensors (Maintenance Mode: Code 32)
11
Refer to "1.4. Operational Check of Sensors
operational check of sensors.
Acquisition of White Level Data (Maintenance Mode: Code 55)
16
Refer to "1.4. Acquisition of White Level Data
acquisition of white level data.
EEPROM Customizing of Main PCB (Maintenance Mode: Code 74)
Refer to "1.4.20 EEPROM Customizing"
Customizing.
For models in France and surrounding countries, Pan-Nordic, East Europe, Oceania or
Iberia, implement the setting for Code 74 in Maintenance mode first. Then, implement
more detailed settings for Code 52.
Setting the Serial Number
(1) Connect the computer to the machine with the USB cable.
(2) Double-click the brmainte.exe file (maintenance utility) which has been copied in the
folder to start.
Select "Input Information" from Menu. Select the applicable model name.
" in Chapter
" in Chapter
in Chapter
5, and perform the EEPROM
4-9
5, and perform the
5, and perform
5, and perform the
5, and perform the
Confidential